Led UV Printer – Ten Capabilities to Take Into Consideration Whenever Getting a Led UV Printer.

Do you need to add a photo in your quilt that looked similar to portion of the fabric than an iron-on decal?

In past times, we relied on photo transfer paper to iron our photo onto our quilt block. Have you heard about direct-to-garment printing? It’s an incredible new method to get your favorite photo from your scrapbook and on your quilt block.

Direct-to-garment (DTG) printing is a type of digital printing. By using a value of about $20,000, it’s not practical to operate out and acquire your very own DTG printer. The standard price for coffee printer is $8 to $10.

This process might be a more costly than the traditional photo transfer method. That’s partially as the technology is so new. If you opt to use a DTG photo on the memory quilt block, there are several things to look for when deciding on the printer who will do the meet your needs:

1. Be sure there are no chemicals required to pre-treat your fabric first. Some DTG printers create a photo that is a lot more like screen printing. You don’t want that look or feel on the quilt. The ink is going to be hard on top of the fabric and may eventually (sometimes much earlier than later) are going to crack and wear with washings. Ask your prospective printer to see a sample of something they’ve printed. Provided you can have the ink is raised over the surface in any way whatsoever, it’s probably a sublimation type process which requires chemicals to pre-treat the material.

2. Use a type of digital DTG printing made available from the Brother GT 541. There are no chemicals required to pre-treat the material. The inks bond with all the natural fibers and are heat cured setting the photo. The inks are water based, which will help leave a soft yet crisp image on the fabric.

There are many downfalls to using led uv printer in your quilt blocks. One pitfall is color limitations. Since DTG printing is really a form a digital printing, there is absolutely no white ink. White is the lack of color. Because of this you can not print an image on navy blue or black fabric.

Digital garment or fabric printing is actually a CMYK format – cyan, magenta, yellow, and black. You may mix those colors to have a full spectrum of accurate colors – not white. There are actually DTG printers that print white ink, but the majority of those require chemical pre-treatments for the fabric and definately will give you that thick surface print.

You must work with a light colored or neutral fabric and it should be cotton or even a cotton blend. The fabric must have the ability to withstand 350 degrees for around 30 seconds. When you are not 09dexypky with totally cotton or a 50/50 blend, ask your printer in case the fabric works.

Size of your print may be a limitation. Most DTG printers have a printing field approximately 14 inches x 16 inches. For almost all quilters, that size range won’t be described as a problem.

And talking about printing fields, here’s a hint. Most direct to t-shirt printer charge to get a 14×16 surface. When your blocks will permit 2 or 3 photos to fit within that range, you can get every one of them printed for the cost of one. Talk with the printer to determine if it’s possible with your particular project.

Like most technological advances, the price tag on digital garment (or fabric) printing probably will decrease with time. Maybe it is going to be also located on smaller printers for home and private use. For the time being, try to get a DTG printer for your forthcoming photo quilt project. The outcome will look like custom fabric, that will be an incredible touch for the unique quilt!